# Hacking

This section provides some notes on how to hack on Nix. To get the
latest version of Nix from GitHub:

```console
$ git clone https://github.com/NixOS/nix.git
$ cd nix
```

The following instructions assume you already have some version of Nix installed locally, so that you can use it to set up the development environment. If you don't have it installed, follow the [installation instructions].

[installation instructions]: ../installation/index.md

## Building Nix with flakes

This section assumes you are using Nix with the [`flakes`] and [`nix-command`] experimental features enabled.
See the [Building Nix](#building-nix) section for equivalent instructions using stable Nix interfaces.

[`flakes`]: @docroot@/contributing/experimental-features.md#xp-feature-flakes
[`nix-command`]: @docroot@/contributing/experimental-features.md#xp-nix-command

To build all dependencies and start a shell in which all environment variables are set up so that those dependencies can be found:

```console
$ nix develop
```

This shell also adds `./outputs/bin/nix` to your `$PATH` so you can run `nix` immediately after building it.

To get a shell with one of the other [supported compilation environments](#compilation-environments):

```console
$ nix develop .#native-clang11StdenvPackages
```

> **Note**
>
> Use `ccacheStdenv` to drastically improve rebuild time.
> By default, [ccache](https://ccache.dev) keeps artifacts in `~/.cache/ccache/`.

To build Nix itself in this shell:

```console
[nix-shell]$ autoreconfPhase
[nix-shell]$ configurePhase
[nix-shell]$ make -j $NIX_BUILD_CORES
```

To install it in `$(pwd)/outputs` and test it:

```console
[nix-shell]$ make install
[nix-shell]$ make installcheck -j $NIX_BUILD_CORES
[nix-shell]$ nix --version
nix (Nix) 2.12
```

To build a release version of Nix for the current operating system and CPU architecture:

```console
$ nix build
```

You can also build Nix for one of the [supported platforms](#platforms).

## Building Nix

To build all dependencies and start a shell in which all environment variables are set up so that those dependencies can be found:

```console
$ nix-shell
```

To get a shell with one of the other [supported compilation environments](#compilation-environments):

```console
$ nix-shell --attr devShells.x86_64-linux.native-clang11StdenvPackages
```

> **Note**
>
> You can use `native-ccacheStdenvPackages` to drastically improve rebuild time.
> By default, [ccache](https://ccache.dev) keeps artifacts in `~/.cache/ccache/`.

To build Nix itself in this shell:

```console
[nix-shell]$ autoreconfPhase
[nix-shell]$ ./configure $configureFlags --prefix=$(pwd)/outputs/out
[nix-shell]$ make -j $NIX_BUILD_CORES
```

To install it in `$(pwd)/outputs` and test it:

```console
[nix-shell]$ make install
[nix-shell]$ make installcheck -j $NIX_BUILD_CORES
[nix-shell]$ ./outputs/out/bin/nix --version
nix (Nix) 2.12
```

To build a release version of Nix for the current operating system and CPU architecture:

```console
$ nix-build
```

You can also build Nix for one of the [supported platforms](#platforms).

## Platforms

Nix can be built for various platforms, as specified in [`flake.nix`]:

[`flake.nix`]: https://github.com/nixos/nix/blob/master/flake.nix

- `x86_64-linux`
- `x86_64-darwin`
- `i686-linux`
- `aarch64-linux`
- `aarch64-darwin`
- `armv6l-linux`
- `armv7l-linux`

In order to build Nix for a different platform than the one you're currently
on, you need a way for your current Nix installation to build code for that
platform. Common solutions include [remote builders] and [binary format emulation]
(only supported on NixOS).

[remote builders]: ../advanced-topics/distributed-builds.md
[binary format emulation]: https://nixos.org/manual/nixos/stable/options.html#opt-boot.binfmt.emulatedSystems

Given such a setup, executing the build only requires selecting the respective attribute.
For example, to compile for `aarch64-linux`:

```console
$ nix-build --attr packages.aarch64-linux.default
```

or for Nix with the [`flakes`] and [`nix-command`] experimental features enabled:

```console
$ nix build .#packages.aarch64-linux.default
```

Cross-compiled builds are available for ARMv6 (`armv6l-linux`) and ARMv7 (`armv7l-linux`).
Add more [system types](#system-type) to `crossSystems` in `flake.nix` to bootstrap Nix on unsupported platforms.

### Building for multiple platforms at once

It is useful to perform multiple cross and native builds on the same source tree,
for example to ensure that better support for one platform doesn't break the build for another.
In order to facilitate this, Nix has some support for being built out of tree – that is, placing build artefacts in a different directory than the source code:

1. Create a directory for the build, e.g.

   ```bash
   mkdir build
   ```

2. Run the configure script from that directory, e.g.

   ```bash
   cd build
   ../configure <configure flags>
   ```

3. Run make from the source directory, but with the build directory specified, e.g.

   ```bash
   make builddir=build <make flags>
   ```

## System type

Nix uses a string with he following format to identify the *system type* or *platform* it runs on:

```
<cpu>-<os>[-<abi>]
```

It is set when Nix is compiled for the given system, and based on the output of [`config.guess`](https://github.com/nixos/nix/blob/master/config/config.guess) ([upstream](https://git.savannah.gnu.org/cgit/config.git/tree/config.guess)):

```
<cpu>-<vendor>-<os>[<version>][-<abi>]
```

When Nix is built such that `./configure` is passed any of the `--host`, `--build`, `--target` options, the value is based on the output of [`config.sub`](https://github.com/nixos/nix/blob/master/config/config.sub) ([upstream](https://git.savannah.gnu.org/cgit/config.git/tree/config.sub)):

```
<cpu>-<vendor>[-<kernel>]-<os>
```

For historic reasons and backward-compatibility, some CPU and OS identifiers are translated from the GNU Autotools naming convention in [`configure.ac`](https://github.com/nixos/nix/blob/master/configure.ac) as follows:

| `config.guess`             | Nix                 |
|----------------------------|---------------------|
| `amd64`                    | `x86_64`            |
| `i*86`                     | `i686`              |
| `arm6`                     | `arm6l`             |
| `arm7`                     | `arm7l`             |
| `linux-gnu*`               | `linux`             |
| `linux-musl*`              | `linux`             |

## Compilation environments

Nix can be compiled using multiple environments:

- `stdenv`: default;
- `gccStdenv`: force the use of `gcc` compiler;
- `clangStdenv`: force the use of `clang` compiler;
- `ccacheStdenv`: enable [ccache], a compiler cache to speed up compilation.

To build with one of those environments, you can use

```console
$ nix build .#nix-ccacheStdenv
```

for flake-enabled Nix, or

```console
$ nix-build --attr nix-ccacheStdenv
```

for classic Nix.

You can use any of the other supported environments in place of `nix-ccacheStdenv`.

## Editor integration

The `clangd` LSP server is installed by default on the `clang`-based `devShell`s.
See [supported compilation environments](#compilation-environments) and instructions how to set up a shell [with flakes](#nix-with-flakes) or in [classic Nix](#classic-nix).

To use the LSP with your editor, you first need to [set up `clangd`](https://clangd.llvm.org/installation#project-setup) by running:

```console
make clean && bear -- make -j$NIX_BUILD_CORES default check install
```

Configure your editor to use the `clangd` from the shell, either by running it inside the development shell, or by using [nix-direnv](https://github.com/nix-community/nix-direnv) and [the appropriate editor plugin](https://github.com/direnv/direnv/wiki#editor-integration).

> **Note**
>
> For some editors (e.g. Visual Studio Code), you may need to install a [special extension](https://open-vsx.org/extension/llvm-vs-code-extensions/vscode-clangd) for the editor to interact with `clangd`.
> Some other editors (e.g. Emacs, Vim) need a plugin to support LSP servers in general (e.g. [lsp-mode](https://github.com/emacs-lsp/lsp-mode) for Emacs and [vim-lsp](https://github.com/prabirshrestha/vim-lsp) for vim).
> Editor-specific setup is typically opinionated, so we will not cover it here in more detail.

## Add a release note

`doc/manual/rl-next` contains release notes entries for all unreleased changes.

User-visible changes should come with a release note.

### Add an entry

Here's what a complete entry looks like. The file name is not incorporated in the document.

```
synopsis: Basically a title
issues: #1234
prs: #1238
description: {

Here's one or more paragraphs that describe the change.

- It's markdown
- Add references to the manual using @docroot@

}
```

Significant changes should add the following header, which moves them to the top.

```
significance: significant
```

<!-- Keep an eye on https://codeberg.org/fgaz/changelog-d/issues/1 -->
See also the [format documentation](https://github.com/haskell/cabal/blob/master/CONTRIBUTING.md#changelog).

### Build process

Releases have a precomputed `rl-MAJOR.MINOR.md`, and no `rl-next.md`.
Set `buildUnreleasedNotes = true;` in `flake.nix` to build the release notes on the fly.