Clean up as a preparation for the TUI

src/main.rs

@@ -7,10 +7,9 @@ use clap::{Parser, Subcommand};
 use console::Emoji;
 use notify_debouncer_mini::notify::RecursiveMode;
 use notify_debouncer_mini::{new_debouncer, DebouncedEventKind};
-use shlex::Shlex;
 use std::io::{BufRead, Write};
 use std::path::Path;
-use std::process::{exit, Command};
+use std::process::exit;
 use std::sync::atomic::{AtomicBool, Ordering};
 use std::sync::mpsc::{channel, RecvTimeoutError};
 use std::sync::{Arc, Mutex};
@@ -31,9 +30,6 @@ mod verify;
 #[derive(Parser)]
 #[command(version)]
 struct Args {
-    /// Show outputs from the test exercises
-    #[arg(long)]
-    nocapture: bool,
     #[command(subcommand)]
     command: Option<Subcommands>,
 }
@@ -45,11 +41,7 @@ enum Subcommands {
     /// Verify all exercises according to the recommended order
     Verify,
     /// Rerun `verify` when files were edited
-    Watch {
+    Watch,
-        /// Show hints on success
-        #[arg(long)]
-        success_hints: bool,
-    },
     /// Run/Test a single exercise
     Run {
         /// The name of the exercise
@@ -117,7 +109,6 @@ If you are just starting with Rustlings, run the command `rustlings init` to ini
         exit(1);
     }
 
-    let verbose = args.nocapture;
     let command = args.command.unwrap_or_else(|| {
         println!("{DEFAULT_OUT}\n");
         exit(0);
@@ -203,7 +194,7 @@ If you are just starting with Rustlings, run the command `rustlings init` to ini
 
         Subcommands::Run { name } => {
             let exercise = find_exercise(&name, &exercises)?;
-            run(exercise, verbose).unwrap_or_else(|_| exit(1));
+            run(exercise).unwrap_or_else(|_| exit(1));
         }
 
         Subcommands::Reset { name } => {
@@ -219,12 +210,12 @@ If you are just starting with Rustlings, run the command `rustlings init` to ini
             println!("{}", exercise.hint);
         }
 
-        Subcommands::Verify => match verify(&exercises, (0, exercises.len()), verbose, false)? {
+        Subcommands::Verify => match verify(&exercises, (0, exercises.len()))? {
             VerifyState::AllExercisesDone => println!("All exercises done!"),
             VerifyState::Failed(exercise) => bail!("Exercise {exercise} failed"),
         },
 
-        Subcommands::Watch { success_hints } => match watch(&exercises, verbose, success_hints) {
+        Subcommands::Watch => match watch(&exercises) {
             Err(e) => {
                 println!("Error: Could not watch your progress. Error message was {e:?}.");
                 println!("Most likely you've run out of disk space or your 'inotify limit' has been reached.");
@@ -277,17 +268,6 @@ fn spawn_watch_shell(
                 println!("Bye!");
             } else if input == "help" {
                 println!("{WATCH_MODE_HELP_MESSAGE}");
-            } else if let Some(cmd) = input.strip_prefix('!') {
-                let mut parts = Shlex::new(cmd);
-
-                let Some(program) = parts.next() else {
-                    println!("no command provided");
-                    continue;
-                };
-
-                if let Err(e) = Command::new(program).args(parts).status() {
-                    println!("failed to execute command `{cmd}`: {e}");
-                }
             } else {
                 println!("unknown command: {input}\n{WATCH_MODE_HELP_MESSAGE}");
             }
@@ -319,7 +299,7 @@ enum WatchStatus {
     Unfinished,
 }
 
-fn watch(exercises: &[Exercise], verbose: bool, success_hints: bool) -> Result<WatchStatus> {
+fn watch(exercises: &[Exercise]) -> Result<WatchStatus> {
     /* Clears the terminal with an ANSI escape code.
     Works in UNIX and newer Windows terminals. */
     fn clear_screen() {
@@ -336,8 +316,7 @@ fn watch(exercises: &[Exercise], verbose: bool, success_hints: bool) -> Result<W
 
     clear_screen();
 
-    let failed_exercise_hint =
+    let failed_exercise_hint = match verify(exercises, (0, exercises.len()))? {
-        match verify(exercises, (0, exercises.len()), verbose, success_hints)? {
         VerifyState::AllExercisesDone => return Ok(WatchStatus::Finished),
         VerifyState::Failed(exercise) => Arc::new(Mutex::new(Some(exercise.hint.clone()))),
     };
@@ -364,8 +343,6 @@ fn watch(exercises: &[Exercise], verbose: bool, success_hints: bool) -> Result<W
                             match verify(
                                 pending_exercises.iter().copied(),
                                 (num_done, exercises.len()),
-                                verbose,
-                                success_hints,
                             )? {
                                 VerifyState::AllExercisesDone => return Ok(WatchStatus::Finished),
                                 VerifyState::Failed(exercise) => {
@@ -429,7 +406,6 @@ const WATCH_MODE_HELP_MESSAGE: &str = "Commands available to you in watch mode:
   hint   - prints the current exercise's hint
   clear  - clears the screen
   quit   - quits watch mode
-  !<cmd> - executes a command, like `!rustc --explain E0381`
   help   - displays this help message
 
 Watch mode automatically re-evaluates the current exercise

src/run.rs

@@ -1,39 +1,27 @@
-use anyhow::{bail, Result};
+use anyhow::Result;
 use std::io::{stdout, Write};
-use std::time::Duration;
 
-use crate::exercise::{Exercise, Mode};
+use crate::exercise::Exercise;
-use crate::verify::test;
-use indicatif::ProgressBar;
 
 // Invoke the rust compiler on the path of the given exercise,
 // and run the ensuing binary.
 // The verbose argument helps determine whether or not to show
 // the output from the test harnesses (if the mode of the exercise is test)
-pub fn run(exercise: &Exercise, verbose: bool) -> Result<()> {
+pub fn run(exercise: &Exercise) -> Result<()> {
-    match exercise.mode {
-        Mode::Test => test(exercise, verbose),
-        Mode::Compile | Mode::Clippy => compile_and_run(exercise),
-    }
-}
-
-// Compile and run an exercise.
-// This is strictly for non-test binaries, so output is displayed
-fn compile_and_run(exercise: &Exercise) -> Result<()> {
-    let progress_bar = ProgressBar::new_spinner();
-    progress_bar.set_message(format!("Running {exercise}..."));
-    progress_bar.enable_steady_tick(Duration::from_millis(100));
-
     let output = exercise.run()?;
-    progress_bar.finish_and_clear();
 
-    stdout().write_all(&output.stdout)?;
+    {
-    if !output.status.success() {
+        let mut stdout = stdout().lock();
-        stdout().write_all(&output.stderr)?;
+        stdout.write_all(&output.stdout)?;
-        warn!("Ran {} with errors", exercise);
+        stdout.write_all(&output.stderr)?;
-        bail!("TODO");
+        stdout.flush()?;
     }
 
+    if output.status.success() {
         success!("Successfully ran {}", exercise);
+    } else {
+        warn!("Ran {} with errors", exercise);
+    }
+
     Ok(())
 }

src/verify.rs

@@ -1,12 +1,6 @@
-use anyhow::{bail, Result};
+use anyhow::Result;
 use console::style;
-use indicatif::{ProgressBar, ProgressStyle};
+use std::io::{stdout, Write};
-use std::{
-    env,
-    io::{stdout, Write},
-    process::Output,
-    time::Duration,
-};
 
 use crate::exercise::{Exercise, Mode, State};
 
@@ -23,183 +17,41 @@ pub enum VerifyState<'a> {
 pub fn verify<'a>(
     pending_exercises: impl IntoIterator<Item = &'a Exercise>,
     progress: (usize, usize),
-    verbose: bool,
-    success_hints: bool,
 ) -> Result<VerifyState<'a>> {
-    let (num_done, total) = progress;
+    let (mut num_done, total) = progress;
-    let bar = ProgressBar::new(total as u64);
+    println!(
-    let mut percentage = num_done as f32 / total as f32 * 100.0;
+        "Progress: {num_done}/{total} ({:.1}%)\n",
-    bar.set_style(
+        num_done as f32 / total as f32 * 100.0,
-        ProgressStyle::default_bar()
-            .template("Progress: [{bar:60.green/red}] {pos}/{len} {msg}")
-            .expect("Progressbar template should be valid!")
-            .progress_chars("#>-"),
     );
-    bar.set_position(num_done as u64);
-    bar.set_message(format!("({percentage:.1} %)"));
 
     for exercise in pending_exercises {
-        let compile_result = match exercise.mode {
+        let output = exercise.run()?;
-            Mode::Test => compile_and_test(exercise, RunMode::Interactive, verbose, success_hints)?,
+
-            Mode::Compile => compile_and_run_interactively(exercise, success_hints)?,
+        {
-            Mode::Clippy => compile_only(exercise, success_hints)?,
+            let mut stdout = stdout().lock();
-        };
+            stdout.write_all(&output.stdout)?;
-        if !compile_result {
+            stdout.write_all(&output.stderr)?;
+            stdout.flush()?;
+        }
+
+        if !output.status.success() {
             return Ok(VerifyState::Failed(exercise));
         }
-        percentage += 100.0 / total as f32;
-        bar.inc(1);
-        bar.set_message(format!("({percentage:.1} %)"));
-    }
 
-    bar.finish();
+        println!();
-    println!("You completed all exercises!");
-
-    Ok(VerifyState::AllExercisesDone)
-}
-
-#[derive(PartialEq, Eq)]
-enum RunMode {
-    Interactive,
-    NonInteractive,
-}
-
-// Compile and run the resulting test harness of the given Exercise
-pub fn test(exercise: &Exercise, verbose: bool) -> Result<()> {
-    compile_and_test(exercise, RunMode::NonInteractive, verbose, false)?;
-    Ok(())
-}
-
-// Invoke the rust compiler without running the resulting binary
-fn compile_only(exercise: &Exercise, success_hints: bool) -> Result<bool> {
-    let progress_bar = ProgressBar::new_spinner();
-    progress_bar.set_message(format!("Compiling {exercise}..."));
-    progress_bar.enable_steady_tick(Duration::from_millis(100));
-
-    let _ = exercise.run()?;
-    progress_bar.finish_and_clear();
-
-    prompt_for_completion(exercise, None, success_hints)
-}
-
-// Compile the given Exercise and run the resulting binary in an interactive mode
-fn compile_and_run_interactively(exercise: &Exercise, success_hints: bool) -> Result<bool> {
-    let progress_bar = ProgressBar::new_spinner();
-    progress_bar.set_message(format!("Running {exercise}..."));
-    progress_bar.enable_steady_tick(Duration::from_millis(100));
-
-    let output = exercise.run()?;
-    progress_bar.finish_and_clear();
-
-    if !output.status.success() {
-        warn!("Ran {} with errors", exercise);
-        {
-            let mut stdout = stdout().lock();
-            stdout.write_all(&output.stdout)?;
-            stdout.write_all(&output.stderr)?;
-            stdout.flush()?;
-        }
-        bail!("TODO");
-    }
-
-    prompt_for_completion(exercise, Some(output), success_hints)
-}
-
-// Compile the given Exercise as a test harness and display
-// the output if verbose is set to true
-fn compile_and_test(
-    exercise: &Exercise,
-    run_mode: RunMode,
-    verbose: bool,
-    success_hints: bool,
-) -> Result<bool> {
-    let progress_bar = ProgressBar::new_spinner();
-    progress_bar.set_message(format!("Testing {exercise}..."));
-    progress_bar.enable_steady_tick(Duration::from_millis(100));
-
-    let output = exercise.run()?;
-    progress_bar.finish_and_clear();
-
-    if !output.status.success() {
-        warn!(
-            "Testing of {} failed! Please try again. Here's the output:",
-            exercise
-        );
-        {
-            let mut stdout = stdout().lock();
-            stdout.write_all(&output.stdout)?;
-            stdout.write_all(&output.stderr)?;
-            stdout.flush()?;
-        }
-        bail!("TODO");
-    }
-
-    if verbose {
-        stdout().write_all(&output.stdout)?;
-    }
-
-    if run_mode == RunMode::Interactive {
-        prompt_for_completion(exercise, None, success_hints)
-    } else {
-        Ok(true)
-    }
-}
-
-fn prompt_for_completion(
-    exercise: &Exercise,
-    prompt_output: Option<Output>,
-    success_hints: bool,
-) -> Result<bool> {
-    let context = match exercise.state()? {
-        State::Done => return Ok(true),
-        State::Pending(context) => context,
-    };
         match exercise.mode {
             Mode::Compile => success!("Successfully ran {}!", exercise),
             Mode::Test => success!("Successfully tested {}!", exercise),
-        Mode::Clippy => success!("Successfully compiled {}!", exercise),
+            Mode::Clippy => success!("Successfully checked {}!", exercise),
         }
 
-    let no_emoji = env::var("NO_EMOJI").is_ok();
+        if let State::Pending(context) = exercise.state()? {
-
-    let clippy_success_msg = if no_emoji {
-        "The code is compiling, and Clippy is happy!"
-    } else {
-        "The code is compiling, and 📎 Clippy 📎 is happy!"
-    };
-
-    let success_msg = match exercise.mode {
-        Mode::Compile => "The code is compiling!",
-        Mode::Test => "The code is compiling, and the tests pass!",
-        Mode::Clippy => clippy_success_msg,
-    };
-
-    if no_emoji {
-        println!("\n~*~ {success_msg} ~*~\n");
-    } else {
-        println!("\n🎉 🎉 {success_msg} 🎉 🎉\n");
-    }
-
-    if let Some(output) = prompt_output {
-        let separator = separator();
-        println!("Output:\n{separator}");
-        stdout().write_all(&output.stdout).unwrap();
-        println!("\n{separator}\n");
-    }
-    if success_hints {
             println!(
-            "Hints:\n{separator}\n{}\n{separator}\n",
+                "\nYou can keep working on this exercise,
-            exercise.hint,
+or jump into the next one by removing the {} comment:\n",
-            separator = separator(),
-        );
-    }
-
-    println!("You can keep working on this exercise,");
-    println!(
-        "or jump into the next one by removing the {} comment:",
                 style("`I AM NOT DONE`").bold()
             );
-    println!();
+
             for context_line in context {
                 let formatted_line = if context_line.important {
                     format!("{}", style(context_line.line).bold())
@@ -214,10 +66,15 @@ fn prompt_for_completion(
                     formatted_line,
                 );
             }
-
+            return Ok(VerifyState::Failed(exercise));
-    Ok(false)
         }
 
-fn separator() -> console::StyledObject<&'static str> {
+        num_done += 1;
-    style("====================").bold()
+        println!(
+            "Progress: {num_done}/{total} ({:.1}%)\n",
+            num_done as f32 / total as f32 * 100.0,
+        );
+    }
+
+    Ok(VerifyState::AllExercisesDone)
 }